A new phosphorylated epoxy-imide polymer synthesized was obtained using diimide diepoxide (DIDE) resin cured with the new curing agent, 10-phenylphenoxa-phosphine-3,8-dicarboxylic acid-10-oxide (PCAO). In addition, compositions of the synthesized diimide-diepoxide (DIDE), Epon 828, with common curing agents, e.g., 4,4’-diaminodiphenylether (DDE) and 4,4’-diaminodiphenylsulfone (DDS), were used for making a comparison of its curing reactivity and heat, and flame retardation with that of (PCAO). The reactivities of those curing agents toward the two kinds of epoxy resins, as measured by differential scanning calorimetry (DSC), were in the following order : DDE > PCAO > DDS. Through evaluation of thermal gravimetric analysis (TGA), the thermal and flame resistances of epoxy polymers were confirmed in this study as capable of being significantly improved through introduction of imide and cyclic phosphine oxide group into the epoxide and curing agent structures.