This paper demonstrates that a double-layer antireflection (DLAR) coating call he fabricated using a single material, titanium dioxide (TiO(2)). The optical properties of the top and bottom TiO(2) layers were controlled by varying the deposition and sintering conditions, resulting in a range of refractive indices, n = 1.73-2.63 at 600 nm. Weighted average reflectances of 6.5% (measured) and 7.0% (calculated) were achieved for TiO(2) DLAR coatings in air and under glass, respectively. When implemented in a high-efficiency silicon solar cell, a short-circuit current density increase of DeltaJ(sc) = 2.5 mA/cm(2) can be expected for an optimised TiO(2) DLAR coating when compared to a commercial TiO(2) single-layer antireflection coating. Crown Copyright (C) 2003 Published by Elsevier Science B.V. All rights reserved.