A concentrator photovoltaic (PV) module, in which solar cells are integrated in V-troughs, is designed for better heat dissipation. All channels in the V-trough channels are made using thin single Al metal sheet to achieve better heat dissipation from the cells under concentration. Six PV module strips each containing single row of 6 mono-crystalline Si cells are fabricated and mounted in 6 V-trough channels to get concentrator V-trough PV module of 36 cells with maximum power point under standard test condition (STC) of 44.5 W. The V-trough walls are used for light concentration as well as heat dissipation from the cells which provides 4 times higher heat dissipation area than the case when V-trough walls are not used for cooling. The cell temperature in the V-trough module remains nearly same as that in a flat plate PV module, despite light concentration. The controlled temperature and increased current density in concentrator V-trough cells results in higher V(oc) of the module. (C) 2008 Elsevier B.V. All rights reserved.