Thin Solid Films, Vol.517, No.5, 1790-1793, 2009
Influence of dopant and polymeric matrix on Indium tin oxide/p-zinc phtalocyanine/n-Si hybrid solar cells
The present paper reports on the photovoltaic properties of zinc phthalocyanine (ZnPc) films with various dopants sandwiched between indium tin oxide (ITO) and n-type silicon substrate. The ZnPc films were realized by entrapping the molecules in a poly(methyl methacrylate) matrix upon stirring and heating the components in solution. For the ITO/p-ZnPc/n-Si sandwich structure solar cells with ZnPc doped with 12 and without post-annealing, the measured short-circuit current density, open-circuit voltage, maximum output power. fill factor and efficiency were 28.8 mA/cm(2). 0.46 V, 5.55 mW/cm(2). 0.42 and 5.55%, respectively, under AM 1.5 illumination. (C) 2008 Elsevier B.V. All rights reserved.
Keywords:Zinc phthalocyanine;Poly(methyl methacrylate);Hybrid solar cells;Electrical properties and measurements;Efficiency