In this study, we fabricated nanocone-presenting SiGe antireflection layers using only ultrahigh-vacuum chemical vapor deposition. In situ thermal annealing was adopted to cause SiGe clustering, yielding a characteristic nanocone array on the SiGe surface. Atomic force microscopy indicated that the SiGe nanocones had uniform height and distribution. Spectrophotometric measurements revealed that annealing at 900 degrees C yielded SiGe thin films possessing superior antireflective properties relative to those of the as-grown SiGe sample. We attribute this decrease in reflectance to the presence of the nanostructured cones. Prior to heat treatment, the mean reflectance of ultraviolet rays (wavelength <400 nm) of the SiGe thin film was ca. 61.7%; it reduced significantly to less than 28.5% when the SiGe thin film was annealed at 900 degrees C. Thus, the drop in reflectance of the SiGe thin film after thermal treatment exceeded 33%. (C) 2010 Elsevier B.V. All rights reserved.