ZnO thin films, codoped with Al and Ga, were prepared on fused quartz (FQ) and cyclo-olefin polymer (COP) substrates using a radial frequency magnetron sputtering technique at room temperature, without the introducing of oxygen. The elemental distributions of Al, Ga, Zn and O throughout the films were found and no compositional variation in working pressure was observed. A resistivity of 0.03-4.07 Omega cm in AGZ/FQ films (Fig. 2b and 0.04-5.73 Omega cm in AGZ/COP films as well as a transmittance of above 85% were obtained by appropriate control of the working pressure. Compared with the band gap energy of single crystal ZnO, the band gap energy of the AGZ/FQ thin film was somewhat higher. The band gap energy of the AGZ/FQ films showed a tendency to increase with the working pressure employed. Crown Copyright (C) 2010 Published by Elsevier B.V. All rights reserved.