The crystallization, melting behavior, and morphology of a low ethylene content block propylene-ethylene copolymer (BPP) and a high-density polyethylene (HDPE) blend were studied. It was found that the Existence of ethylene-propylene rubber (EPR) in BPP has more influence on the crystallization of HDPE than on that of PP. This leads to the decreasing of the melting temperature of the HDPE component in the blends. It is suggested that the EPR component in BPP shifted to the HDPE component during the blending process. The crystallinity of the HDPE phase in the blends decreased with increasing BPP content. The morphology of these blends was studied by polarized light microscopy (PLM) and SEM. For a BPP-rich blend, it was observed that the HDPE phase formed particles dispersed in the PP matrix. The amorphous EPR chains may penetrate into HDPE particles to form a transition layer.