In order to take the tetrahedral amorphous carbon (ta-C) films as the high acoustic impedence layer in a Bragg reflector isolating acoustic wave from the substrate in solidly mounted resonator, the multilayer films consisting of sp2-rich layers and sp3-rich layers were deposited from a filtered cathodic vacuum arc by adjusting the substrate bias. The microstructure of the films was evaluated using a visible Raman spectroscopy. The stress was calculated according to the changed curvature of the coated and bare substrate. The hardness, modulus and scratching were measured using a nanoindenter. It has been shown that the multilayer structure maintaining high tetrahedral content, high hardness and high elastic modulus is still characterized with lower intrinsic stress and better adhesion. (C) 2011 Elsevier B.V. All rights reserved.