We study spin-torque-driven ferromagnetic resonance (ST-FMR) in point contacts. Point contacts as small as a few nanometers in size are used to inject microwave currents into F/N/F spin valves where two ferromagnetic (F) layers are separated by a nonmagnetic (N) metal spacer. High densities of injected currents produce the spin-transfer torque on magnetic moments and drive FMR in the F-layers. The resonance is detected electrically when a small rectified dc voltage appears across the point contact. Here we focus on the origin of this rectified signal and study ST-FMR in point contacts to spin valves with different ferromagnets (Py and Co) and single ferromagnetic (Py) films, as well as in spin-valve wires patterned by electron beam lithography. We find that this voltage can be explained by the resistance variations which originate from giant magnetoresistance in point contacts to spin valves and involve effects of anisotropic magnetoresistance and extraordinary Hall effect on the propagation of microwave currents in continuous F-films and microwires. (C) 2011 Elsevier B.V. All rights reserved.