Thin Solid Films, Vol.520, No.13, 4237-4241, 2012
Highly c-axis oriented AlN layers grown on c-plane sapphire substrates by radio-frequency sputter epitaxy at 1080 degrees C
Aluminum nitride (AlN) single-crystalline layers were grown on c-plane sapphire substrates by radio-frequency magnetron sputter epitaxy using N-2/Ar mixture ambient gas and 5-N grade Al target. The crystalline structures of the AlN layers depending on substrate temperature and N-2 composition ratio in ambient gas, were predominantly studied. The crystalline quality of the AlN layer was improved by elevating substrate temperature, and the full-widths at half-maximum (FWHMs) of X-ray rocking curves (XRC) for both symmetric and asymmetric planes of AlN layers grown at N-2 composition ratio of around 25%, became low. The FWHMs of XRC for (0002) diffraction of the AlN layers grown at 1080 degrees C, were less than 20 arcsec. The surface root-mean-square roughness of such highly c-axis oriented AlN layer was determined by atomic force microscopy, and was increased from 0.6 nm to 1.3 nm when AlN layer thickness was varied from 0.15 to 0.7 mu m. (C) 2012 Elsevier B.V. All rights reserved.
Keywords:Aluminum nitride;Single-crystalline layers;Radio-frequency magnetron sputtering;Epitaxy;High substrate temperature;X-ray diffraction