This paper discusses a novel approach that may provide a complete solution to combating oil spills. The technology is centered on a cross-linked polyolefin terpolymer (x-OS-DVB), containing 1-octene, styrene, and divinylbenzene units, which is an oil superabsorbent polymer (oil SAP) with aliphatic and aromatic side chains that have similar solubility parameters (oleophilic and hydrophobic properties), with the hydrocarbons in crude oil. Some x-OS-DVB terpolymers, with desirable morphology (amorphous, low T-g, and high free volume) and lightly cross-linked (complete network) structure, show rapid oil absorption and swelling to reach a capacity 45 times their weight. The capacity of oil uptake (swelling) is inversely proportional to the cross-linking density. The combination of selective oil absorption (without water) and tough mechanical strength offers buoyancy, stability, and easy recovery on water surfaces. The recovered oil-swelled gel, containing more than 98% oil and 2% x-OS-DVB, is suitable for regular oil-refining processes (an economic, no waste, and no pollutant approach). The bulk side chains in x-OS-DVB result in a relatively low ceiling temperature for depolymerization and zero heating residue at 450 degrees C, well below the first distillation step (>600 degrees C) in oil refining. Furthermore, polyolefins are the most inexpensive polymeric material, with a large production capability around the world. Overall, this cost-effective new polyolefin oil-SAP technology shall dramatically reduce the environmental impacts from oil spills and help recover one of our most precious natural resources.