Nanocomposite foams were prepared on addition of 63S bioactive glass (BC) to pure hydroxyapatite (HA), in proportion of 0, 25, 50, 75, and 100 wt.%, and their mechanical properties and bioactivity were compared. The prepared nanocomposite foams have a grain size in the range 24-38 nm and pore size in the range 100-400 mu m. The compressive strength and elastic modulus increased with increasing the amount of BC addition up to 25 wt.% and then decreased by more addition of BC. The maximum values of compressive strength and elastic modulus were found to be about 2.78 MPa and 219 MPa, respectively. The mean values of total and interconnected porosity were calculated in the range 84-88% and 57-76%, respectively. The obtained composite foams have chemical composition similar to the mineral phase of bone and by changing the ratio of HA/BC it can reach the appropriate bioactivity and biodegradability level needed for different biomedical applications. (C) 2012 Elsevier Ltd. All rights reserved.