Polylactide (PLA) was melt blended with poly(1,2-propylene glycol adipate) (PPA) in a Thermo-Haake mixer. Thermal, mechanical, and rheological properties of the blends were investigated by means of differential scanning calorimetry, dynamic mechanical analysis, tensile test, and small amplitude oscillatory shear rheometry. PPA lowered the glass transition temperature and increased the ability of PLA to cold crystallization. With the increase in PPA content (525 wt%), the blends showed decreased tensile strength and Young's modulus; however, impact strength and elongation-at-break along were dramatically increased due to the plastic deformation. Morphological results of PLA/PPA blends showed that PPA was good compatible with PLA. The plasticization effect of PPA was also manifested by the lowering of dynamic storage modulus and viscosity in the melt state of the blends compared with neat PLA. POLYM. ENG. SCI., 2013. (c) 2012 Society of Plastics Engineers