Mixed-metal iron-vanadium analogues of the 1,4-benzenedicarboxylate (BDC) metal-organic framework MIL-53 have been synthesized solvothermally in N,N'-dimethylformamide (DMF) from metal chlorides using initial Fe:V ratios of 2:1 and 1:1. At 200 degrees C and short reaction time (1 h), materials (Fe,V)(BDC)-B-II/III(DMF1-xFx) crystallize directly, whereas the use of longer reaction times (3 days) at 170 degrees C yields phases of composition [(Fe,V)(0.5)(III)(Fe,V)(0.5)(II)(BDC)(OH,F)](0.5-).0.5DMA(+) (DMA = dimethylammonium). The identity of the materials is confirmed using high-resolution powder X-ray diffraction, with refined unit cell parameters compared to known pure iron analogues of the same phases. The oxidation states of iron and vanadium in all samples are verified using X-ray absorption near edge structure ()CANES) spectroscopy at the metal K-edges. This shows that in the two sets of materials each of the vanadium and the iron centers are present in both +2 and +3 oxidation states. The local environment and oxidation state of iron is confirmed by Fe-57 Mossbauer spectrometry. Infrared and Raman spectroscopies as a function of temperature allowed the conditions for removal of extra-framework species to be identified, and the evolution of mu(2)-hydroxyls to be monitored. Thus calcination of the mixed-valent, mixed-metal phases [(Fe,V)(0.5)(III)(Fe,V)(0.5)(II)(BDC)(OH,F)](0.5-).0.5DMA(+) yields single-phase MIL-53-type materials, (Fe,V)(III)(BDC)(OH,F). The iron-rich, mixed-metal MIL-53 shows structural flexibility that is distinct from either the pure Fe material or the pure V material, with a thermally induced pore opening upon heating that is reversible upon cooling. In contrast, the material with a Fe:V content of 1:1 shows an irreversible expansion upon heating, akin to the pure vanadium analogue, suggesting the presence of some domains of vanadium-rich regions that can be permanently oxidized to V(IV).