The composites based on ethylene-propylene-diene monomer rubber (EPDM) with aluminum hydroxide (ATH), nanoclay, vulcanizing agent, and curing accelerator were prepared by conventional mill compounding method. The thermal stability and the flame retardant properties were evaluated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL-94 test, cone calorimeter, and smoke density chamber tests. The results indicated that the substitution of the nanoclay in the EPDM/ATH composites increased the 50% weight loss temperature and the LOI value, and reduced the peak heat release rate (pk-HRR), the extinction coefficient (Ext Coef), the maximal smoke density (Dm), and the whole smoke at the first 4 min (VOF4) of the test specimens. The synergistic flame retardancy of the nanoclay with ATH in EPDM matrix could imply that the formation of a reinforced char/nanoclay layer during combustion prevents the diffusion of the oxygen and the decomposed organic volatiles in the flame. The mechanical properties of the composites have been increased by replacing more of the nanoclays into the EPDM/ATH blends. The best loading of the nanoclay in EPDM/ATH composites is 3 wt %, which keeps LOI in the enough value, the V-0 rating in the UL-94 test, and the improved mechanical properties with better dispersion and exfoliation of the nanoclays shown by transmission electron microscopy (TEM) micrographs. (c) 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2042-2048, 2013