In conventional melting experiments of pure monocrystalline metals, the phase transformation starts at the sample surface and progresses inwards according to thermal gradients. In solutionized alloys, traces of internal melting are usually observed after reheating and quenching from the semi-solid state. The formation and development of these liquid pockets are not fully understood despite their significance in semi-solid processing, where the formability is greatly influenced by the distribution of liquid within the feedstock material. In situ X-ray microtomography was performed in this study to shed light on this phenomenon. We report in detail the melting and isothermal holding of a model binary alloy where a remarkable number of liquid droplets were observed to develop and coalesce. Various computational tools have been used to study their statistical evolution as well as the local ripening mechanisms involved. We analysed an interesting case of particle coarsening which differs from classical case studies by the fact that the fast-diffusing liquid phase is entrapped within the slow-diffusing solid medium.