The macroscopic phase behaviors of a solvent system containing two extractants, tri-n-butyl phosphate (TBP) and di-n-butyl phosphoric acid (HDBP) in n-dodecane, were investigated through use of liquid liquid extraction and small-angle Xray scattering (SAXS) experiments. Five organic solutions, each containing a total extractant concentration (TBP + HDBP) of 1 M in varying molar ratios (0, 0.25, 0.5, 0.75, and 1.0 [TBP]:[TBP + HDBP]), were contacted with 0.2 M HNO3 aqueous solutions without and with dysprosium(III) at a concentration of 10(-4) M. An enhancement of the extraction of Dy3+-due to effects of synergism arising from the binary combination of extractants-was observed. SAXS data were collected for all solution compositions from 0 to 1 mol-fraction end ratios of TBP after contact with the acidic aqueous solutions both in the absence and presence of Dy as well as for the organic phases before aqueous contact. In the precontacted solutions, no notable changes in the SAXS data were observed upon combining the extractants so that the scattering intensity (I) measured at zero angle (Q = 0 angstrom(-1))-parameter. I(0)-the experimental radius of gyration (R-g), and the maximum linear extent (MLE) of the extractant aggregates were arithmetic averages of the two end members, 1 M HDBP, on the one hand, and 1 M TBP, on the other. In contrast, after contact with the aqueous phases with and without Dy3+, a significant reorganization occurs with larger aggregates apparent in the extractant mixtures and smaller in the two end member solutions. In particular, the maximum values of the metrical parameters (I(0), R-g, and MLE) correlate with the apparent optimal synergistic extraction mole ratio of 0.25. The SAXS data were further analyzed using the recently developed generalized indirect Fourier transformation (GIFT) method to provide pair-distance distribution functions with real-space information on aggregate morphology. Before aqueous contact, the organic phases show a systematically varying response from globular-like reverse micelles in the case of 1 M TBP to rod-shaped architectures in the case of 1 M HDBP. After aqueous contact, the aggregate morphologies of the mixed extractant systems are not simple linear combinations of those for the two end members. Rather, they have larger and more elongated structures, showing sharp discontinuities in the metrics of the aggregate entities that are coincident with the synergistic extraction mixture for Dy3+. The results in this initial study suggest a supramolecular, micellization aspect to synergism that remains underexplored and warrants further investigation, especially as it concerns the contemporary relevance to decades-old process chemistry and practices for high throughput separations systems.