Combustion and Flame, Vol.160, No.12, 2911-2927, 2013
LES of a premixed jet flame DNS using a strained flamelet model
Turbulent premixed flames in the thin and broken reaction zones regimes are difficult to model with Large Eddy Simulation (LES) because turbulence strongly perturbs subfilter scale flame structures. This study addresses the difficulty by proposing a strained flamelet model for LES of high Karlovitz number flames. The proposed model extends a previously developed premixed flamelet approach to account for turbulence's perturbation of subfilter premixed flame structures. The model describes combustion processes by solving strained premixed fiamelets, tabulating the results in terms of a progress variable and a hydrogen radical, and invoking a presumed PDF framework to account for subfilter physics. The model is validated using two dimensional laminar flame studies, and is then tested by performing an LES of a premixed slot-jet direct numerical simulation (DNS). In the premixed regime diagram this slot-jet is found at the edge of the broken reaction zones regime. Comparisons of the DNS, the strained flamelet model LES, and an unstrained flamelet model LES confirm that turbulence perturbs flame structure to leading order effect, and that the use of an unstrained flamelet LES model under-predicts flame height. It is shown that the strained flamelet model captures the physics characterizing interactions of mixing and chemistry in highly turbulent regimes. (C) 2013 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
Keywords:Premixed combustion;Flamelet modeling;Strain and stretch;Large eddy simulation;Direct numerical simulation