화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Journal of Industrial and Engineering Chemistry, Vol.20, No.1, 245-258, January, 2014
DOI10.1016/j.jiec.2013.03.041  Export Citation
A comparative study of hydroxyapatite nanostructures produced under different milling conditions and thermal treatment of bovine bone
Bahman Nasiri-Tabrizi†, Abbas Fahami, and Reza Ebrahimi-Kahrizsangi
  • Materials Engineering Department, Najafabad Branch, Islamic Azad University, Najafabad, Isfahan, Iran
E-mail:
In the present investigation the effects of milling parameters (time, atmosphere, and media) and chemical composition of raw materials on the mechanochemical synthesis of nanocrystalline hydroxyapatite (n-HAp) were studied. For a comparative study of the mechanically activated samples versus thermally treated specimen (natural origin), n-HAp was also produced via annealing of bovine bone at 800 ℃ for 2 h. The gained powders exhibited average sizes about 32 and 27 nm under air atmosphere, and about 32 and 34 nm under argon atmosphere. TEM images confirmed the formation of n-HAp with various morphologies under different experimental conditions.
Keywords:Hydroxyapatite;Mechanochemical;Bovine bone;Annealing;Nanocrystalline
  1. Franco PQ, Joao CFC, Silva JC, Borges JP, Materials Letters., 67, 233 (2012)
  2. Feng Y, Haifeng G, Haijiao Z, Xiulan H, Acta Biomaterialia., 6, 2212 (2010)
  3. Ichiro O, Toshiharu Y, Hai-Ying J, Yoshinori I, Hirobumi H, Yoshikiyo A, Masanori N, Tetsunori O, Kowichi J, Biomaterials., 25, 4709 (2004)
  4. Shepard SR, Brickman-Stone C, Schrimsher JL, Koch G, Journal of Chromatography A., 891, 93 (2000)
  5. Molle P, Lienard A, Gramsik A, Water Science and Technology., 51, 193 (2005)
  6. Salimi MN, Bridson RH, Grover LM, Leeke GA, Powder Technology., 218, 109 (2012)
  7. Iyyappan E, Wilson P, Ceramics International., 39, 771 (2013)
  8. Fathi MH, Hanifi A, Mortazavi V, Journal of Materials Processing Technology., 202, 536 (2008)
  9. Sung YM, Lee JC, Yang JW, J. Cryst. Growth, 262(1-4), 467 (2004)
  10. Saha SK, Banerjee A, Banerjee S, Bose S, Materials Science and Engineering C., 29, 2294 (2009)
  11. Banerjee A, Bandyopadhyay A, Bose S, Materials Science and Engineering C., 27, 729 (2007)
  12. Kalita SJ, Bhardwaj A, Bhatt HA, Materials Science and Engineering C., 27, 441 (2007)
  13. Ooi CY, Hamdi M, Ramesh S, Ceramics International., 33, 1171 (2007)
  14. Tadic D, Epple M, Biomaterials., 25, 987 (2004)
  15. He Z, Ma J, Wang C, Biomaterials., 26, 1613 (2005)
  16. Rhee SH, Biomaterials., 23, 1147 (2002)
  17. Bai R, Wanga S, Mei F, Li T, Li G, J. Ind. Eng. Chem., 17(4), 777 (2011)
  18. Salem A, Velayi E, J. Ind. Eng. Chem., 18(4), 1216 (2012)
  19. Cho JS, Rhee SH, Journal of the European Ceramic Society., 33, 233 (2013)
  20. Honarmandi P, Honarmandi P, Shokuhfar A, Nasiri-Tabrizi B, Ebrahimi-Kahrizsangi R, Advances in Applied Ceramics., 109, 117 (2010)
  21. Fahami A, Nasiri-Tabrizi B, Ebrahimi-Kahrizsangi R, Ceramics International., 38, 6729 (2012)
  22. Xiao PF, Lai MO, Lu L, Electrochimica Acta., 76, 185 (2012)
  23. Huot J, Ravnsbaek DB, Zhang J, Cuevas F, Latroche M, Jensen TR, Prog. Mater. Sci., 58(1), 30 (2013)
  24. Silva CC, Pinheiro AG, Miranda MAR, Goes JC, Sombra ASB, Solid State Sciences., 5, 553 (2003)
  25. Suryanarayana C, Prog. Mater. Sci., 46(1-2), 1 (2001)
  26. Nasiri-Tabrizi B, Honarmandi P, Ebrahimi-Kahrizsangi R, Honarmandi P, Materials Letters., 63, 543 (2009)
  27. Ebrahimi-Kahrizsangi R, Nasiri-Tabrizi B, Chami A, Solid State Sciences., 12, 1645 (2010)
  28. Mohammadi Zahrani E, Fathi MH, Ceramics International., 35, 2311 (2009)
  29. Nakano T, Tokumura A, Umakoshi Y, Metallurgical and Materials Transactions A., 33, 521 (2002)
  30. Nasiri-Tabrizi B, Fahami A, Ceramics International., 39, 4329 (2013)
  31. Sun F, Froes FHS, Journal of Alloys and Compounds., 340, 220 (2002)
  32. Qian J, Kang Y, Zhang W, Li Z, Journal of Materials Science: Materials in Medicine., 19, 3373 (2008)
  33. Evis Z, Ceramics International., 33, 987 (2007)
  34. Landi E, Tampieri A, Celotti G, Sprio S, Journal of the European Ceramic Society., 20, 2377 (2000)
  35. Gonzalez G, Sagarzazu A, Villalba R, Mater. Res. Bull., 41(10), 1902 (2006)
  36. Nasiri-Tabrizi B, Fahami A, Ceramics International., 39, 5125 (2012)
  37. Fathi MH, Zahrani EM, J. Cryst. Growth, 311(5), 1392 (2009)
  38. Leontyev IN, Guterman VE, Pakhomova EB, Timoshenko PE, Guterman AV, Zakharchenko IN, Petin GP, Dkhil B, Journal of Alloys and Compounds., 500, 241 (2010)
  39. Seckler MM, Danese M, Derenzo S, Valarelli JV, Giulietti M, Rodriguez-Clemente R, Journal of Materials Research., 2, 59 (1999)
  40. Sanosh KP, Chu MC, Balakrishnan A, Lee YJ, Kim TN, Cho SJ, Curr. Appl. Phys., 9(6), 1459 (2009)
  41. Li B, Guo B, Fan HS, Zhang XD, Appl. Surf. Sci., 255(2), 357 (2008)
  42. Hawa T, Zachariah MR, Journal of Aerosol Science., 37, 1 (2006)