화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.20, No.4, 1819-1824, July, 2014
Ultrasonochemical coating and characterization of TiO2-coated zirconia fine particles
E-mail:
Zirconia fine particles were prepared by ultrasonic spray pyrolysis (USP) and employed as a substrate for titanium/titania coating by ultrasonochemistry. The effects of several process factors on the characteristics of the prepared particles were investigated and the particles were then characterized by various techniques. This substrate was coated with various titanium concentrations (0.025-0.1 M) for two ultrasonication time periods (30 min, 2 h) by sonochemistry, and finally calcined at 1100 ℃. Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), particle size analysis (PSA), Fourier transformation infrared spectroscopy (FT-IR) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES) comprised the techniques used to characterize them. The particles were prepared in a monodispersed spherical form with no interior cavity; their average size was shown to be 0.62 μm before calcination and 2.57 μm after calcination. The titania surface coating acted to partially stabilize the particles to a tetragonal phase. Based on the analytical results, the optimum conditions for preparing the particles were shown to be 7.5 wt% of titania as an initial solution concentration and 0.5 h of coating time.
  1. Heuer AH, Hobbs LW, Advances in Ceramic, vol. 3, The American Ceramic Society, Columbus, 1981.
  2. Shih WH, Kisailus D, Wei Y, Mater. Lett., 24, 13 (1995)
  3. Garbie RC, Hannink RHJ, Urbani C, Ceram. Int., 6, 19 (1980)
  4. Hannink RHJ, Johnston KA, Pascoe RT, Garbie RC, in: Heuer AH, Hobbs LW (Eds.), Advances in ceramic, The American Ceramic Society, Columbus, 1981 , p.36.
  5. Hisao B, New Ceramics, Gyomsi-Sa, Seoul, 1990, pp. 43.78.
  6. Park JH, New Ceramics, Bando Publishing Ind., Seoul, 1990, pp. 49.80.
  7. Lee JH, Kim BH, Choi ES, Hwang JS, J. Korean Ceram. Soc., 30, 325 (1993)
  8. Cho HJ, Lee JH, Park SJ, J. Korean Ceram. Soc., 28, 851 (1991)
  9. Lee JH, Cho HJ, Park SJ, J. Korean Ceram. Soc., 28, 831 (1991)
  10. Cho SY, Lee JH, Kim MC, Park SJ, J. Korean Ceram. Soc., 31, 465 (1994)
  11. Cho SY, Lee JH, Park SJ, J. Mater. Sci., 30 (1995)
  12. Sharma AK, Aravindhan S, Krishnamurthy R, Mater. Lett., 50, 295 (2001)
  13. Kim BH, Lee JH, J. Korean Ceram. Soc., 32, 575 (1994)
  14. Lee CS, Shim IS, Kim CH, Lee BK, Mat. Res. Symp. Proc., 520, 149 (1998)
  15. Ding T, Zhu JJ, Hong JM, Mater. Lett., 57, 4445 (2003)
  16. Wang H, Zhang JR, Zaho XN, Xu S, Zhu JJ, Mater. Lett., 55, 253 (2002)
  17. Han KR, Park SJ, Hong KS, Jin HW, J. Korean Soc. Anal. Sci., 6 (1993)
  18. Zhong Z, Mastai Y, Koltypin Y, Zhao Y, Gedanken A, Chem. Mater., 11, 2350 (1999)
  19. Seo KL, Lee CS, J. Korean Chem. Soc., 44, 592 (2000)
  20. Shim IS, Lee CS, Bull. Korean Chem. Soc., 23, 1127 (2002)
  21. Entezari MH, Petrier C, Ultrason. Sonochem., 12, 283 (2005)
  22. Filson PB, Dawson-Andoh BE, Bioresour. Technol., 100(7), 2259 (2009)
  23. Saien J, Delavari H, Solymani AR, J. Hazard. Mater., 177(1-3), 1031 (2010)
  24. Kim JW, Choi SW, Lee CS, Anal. Sci. Technol., 24(2), 61 (2011)
  25. Ghows N, Entezari MH, Ultrason. Sonochem., 19, 1070 (2012)