화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Journal of Chemical Engineering, Vol.31, No.8, 1399-1404, August, 2014
DOI10.1007/s11814-014-0068-5  Export Citation
Preparation of acrylonitrile-butadiene-styrene membrane: Investigation of solvent/nonsolvent type and additive concentration
Fariba Sadat Kamelian1, 2, Seyed Mahmoud Mousavi1, †, Ali Ahmadpour1, and Vahideh Ghaffarian1, 2
  • 1Department of Chemical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
  • 2Membrane Processes and Membrane Research Center, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
E-mail:
In the present study, preparation of acrylonitrile-butadiene-styrene (ABS) membrane was investigated via phase inversion method. ABS membrane is sensitive to preparation conditions. Therefore, the effect of solvent/nonsolvent type and concentration of additive and ABS was evaluated on the morphology, tensile strength and car wash wastewater treatment. Polyethylene glycol was used as an additive. The results show that nonsolvent type significantly affects the morphology and consequently the flux and rejections of the pollution indices. Increasing concentration of additive and ABS in the casting solution leads to formation of denser and thinner membranes that have lower flux and higher rejections of the pollution indices.
Keywords:Copolymers;Mechanical Properties;Membranes;Morphology;Separation Techniques
  1. Yousefi M, Gholamian F, Ghanbari D, Salavati-Niasari M, Polyhedron, 30, 1055 (2011)
  2. Boricha AG, Murthy ZVP, J. Membr. Sci., 339(1-2), 239 (2009)
  3. Murthy ZVP, Mungray AA, Singh J, WCECS, 2, 808 (2012)
  4. Hosseini SM, Madaeni SS, Khodabakhshi AR, J. Membr. Sci., 351(1-2), 178 (2010)
  5. Sanaeepur H, Ebadi Amooghin A, Moghadassi A, Kargari A, Moradi S, Ghanbari D, Polym. Adv. Technol., 23, 1207 (2012)
  6. Sanaeepur H, Amooghin AE, Moghadassi A, Kargari A, Sep. Purif. Technol., 80(3), 499 (2011)
  7. Madaeni SS, Arast N, Rahimpour F, Arast Y, Desalination, 280(1-3), 305 (2011)
  8. Anson M, Marchese J, Garis E, Ochoa N, Pagliero C, J. Membr. Sci., 243(1-2), 19 (2004)
  9. Marchese J, Anson M, Ochoa NA, Pradanos P, Palacio L, Hernandez A, Chem. Eng. Sci., 61(16), 5448 (2006)
  10. Saljoughi E, Amirilargani M, Mohammadi T, J. Appl. Polym. Sci., 111(5), 2537 (2009)
  11. Lickly TD, Markham DA, Rainey ML, Food Chem. Toxicol., 29, 25 (1991)
  12. Bokria JG, Schlick S, Polymer, 43(11), 3239 (2002)
  13. Saljoughi E, Mousavi SM, Sep. Purif. Technol., 90, 22 (2012)
  14. Ratta V, Crystallization, morphology, thermal stability and adhesive properties of novel high performance semicrystalline polyimides, PhD Thesis, Virginia Polytechnic Institute and State University, Blacksburg, US (1999).
  15. Beerlage MAM, Polyimide ultrafiltration membranes for nonaqueous systems, PhD Thesis, University of Twente, Enschede, Netherlands (1994).
  16. Young T, Chen L, Desalination, 103, 233 (1995)
  17. Mortaheb HR, Mafi M, Mokhtarani B, Khosravi K, Mashkini F, Ecl. Quim., 35(1), 85 (2010)
  18. Mohammadi T, Saljoughi E, Desalination, 243(1-3), 1 (2009)
  19. Saljoughi E, Amirilargani M, Mohammadi T, Desalination, 262(1-3), 72 (2010)
  20. Saljoughi E, Sadrzadeh M, Mohammadi T, J. Membr. Sci., 326(2), 627 (2009)
  21. Leblanc N, Le Cerf D, Chappey C, Langevin D, Metayer M, Muller G, Sep. Purif. Technol., 22-23, 277 (2001)
  22. Amirilargani M, Saljoughi E, Mohammadi T, Moghbeli MR, Polym. Eng. Sci., 50(5), 885 (2010)