Journal of the Korean Industrial and Engineering Chemistry, Vol.7, No.5, 925-937, October, 1996
불화수소산과 스팀처리한 모더나이트상에서 진공가스유의 분해반응
The Cracking Reaction of Vacuum Gas Oil on Mordenite Modified by HF and Steaming
초록
스팀처리된 모더나이트인 SM6.5 와SM6.5를 불화수소산처리한 경우(FMa) 그리고 SM6.5를 불화수소산처리후 다시 스팀처리한 경우(FMb)인 세 형태의 변형된 모더나이트를 제조하였다. 이들 시료의 특성을 연구하였으며 고정층 반응기에서 진공가스유의 촉매 분해반응을 실시하였다. 시료의 특성은 XRF와 XPS로 평균과 표면의 원소조성을 구하였고 XRD로 단위격자 상수를 측정하였다. 그리고 질소가스의 흡/탈착에 의해 세공성을 구하였고 피리딘흡착에 의한 IR에 의해 표면의 산성질을 측정하였다. 낮은 실리카/알루미나비를 가진 SM6.5는 산량은 많지만 세공용적중 85% 정도가 미세공이었다. SM6.5를 불화수소산처리한 경우는 SM6.5에 비해 산량은 감소하였지만 세공성은 우수하였다. 이 불화수소산처리된 것을 더욱 많은 중세공의 형성을 위해 다시 스팀처리한 경우는 탈알루미늄에 의해 산량은 급격히 감소하지만 미세공이 중세공으로의 전환에 의해 중세공은 급격히 발달되었다. 이들 촉매상에서 큰 분자인 진공가스유의 분해반응에 의해 얻은 전화율과 가솔린, 등유+경유 그리고 옥탄가가 높은 가지달린 방향족 화합물의 수율은 산량은 크지만 미세공 구조인 SM6.5보다는 이를 불화수소산처리한 경우가 산량은 감소하였지만 세공성이 우수하여 향상되었으며 SM6.5를 불화수소산처리한 것을 다시 스팀처리한 경우가 중세공경의 발달로 더욱 우수하였다. 이로부터 모더나이트상에서 큰 분자인 진공가스유의 분해반응은 반응물질의 세공내로 확산의 한계 때문에 세공구조의 영향이 큼을 알 수 있었다.
Three types of mordenites treated by steaming(SM6.5), HF solution for SM6.5(FMa) and HF solutlon+steaming for SM6.5 (FMb) were prepared and used as cracking catalysts of vacuum gas oil. These samples were analysed by XRF and XPS for average and surface Si/Al atomic radio, XRD for unit cell constants, nitrogen adsorption/desorption for porosity, pyridine-IR for acidic properties. In comparison with three type samples, SM6.5 had a lot of acid amount and showed micropore volume mostly( >85% to total volume). Dealuminated FMa, compared with SM6.5, was decreased a little in acid amount and improved for porosity. Also, FMb was decreased further in acid amount and developed in mesopore dramatically. The catalytic activity and the yield of gasoline, kerosine + diesel and branched aromatic over the modified mordenites which have developed mesopore were improved. This is due to limited access of diffusion of large molecules within pore of the modified mordenites.
- Raatz F, Freund E, Marcilly C, J. Chem. Soc.-Faraday Trans., 79, 229 (1983)
- VanGeem PC, Scholle KFM, vanderVelden GPM, Veeman WS, J. Phys. Chem., 92, 1585 (1988)
- Goovaerts F, Vansant EF, Pilippaerts J, J. Chem. Soc.-Faraday Trans., 85, 3675 (1989)
- Ghosh AK, Kydd RA, Catal. Rev.-Sci. Eng., 27(4), 539 (1985)
- Lok BM, Gortsema FP, Messina CA, Rastelli H, Izod TPJ, Am. Chem. Soc. Div. Pertrochem. Prepr., 27, 470 (1982)
- Lok BM, Gortsema FP, Messina CA, Rastelli H, Izod TPJ, ACS Symp. Ser., 218, 41 (1983)
- Gnep NS, Guisnet M, Bull. Soc. Chim. FR, (5-6, pt. 1), 429 (1977)
- Gnep NS, Guisnet M, Bull. Soc. Chim. FR, (5-6, pt. 1), 435 (1977)
- Sariev I, Penchev V, Proceedings of the International Symposium in Heterogeneous Catalysis, Varna, Sofia, Part 2, p. 391 (1979)
- Choudhary VR, Ind. Eng. Chem. Prod. Res. Dev., 16, 12 (1977)
- Aneke LE, Gerritsen LA, vandenBerg PJ, deJong WA, J. Catal., 59, 26 (1979)
- Aneke LE, Gerritsen LA, vandenBerg PJ, deJong WA, Delft Prog. Rep., 2, 167 (1977)
-
Bautista FM, Campelo JM, Garcia A, Luna D, Marinas JM, Romero AA, Navio JA, Macias M, J. Catal., 145(1), 107 (1994)
- Weisz PB, Pure Appl. Chem., 52, 2091 (1980)
- Corma A, Monton JB, Orchilles AV, Appl. Catal., 16, 59 (1985)
- Ratnasamy P, Sivasankar S, Vishnoi S, J. Catal., 69, 428 (1981)
- Ghosh AK, Kydd RA, J. Catal., 103, 399 (1987)
- vanNiekerk MJ, Fletcher JCQ, O'Connor CT, J. Catal., 138, 150 (1992)
- Goovaerts F, Vansant EF, Philippaerts J, Hulsters PD, J. Chem. Soc.-Faraday Trans., 85(11), 3675 (1989)
- Mori N, Nishiyama S, Tsuruya S, Masai M, Appl. Catal. A: Gen., 74, 37 (1991)
- Mostad HB, Riis TU, Ellestad OH, Appl. Catal., 64, 119 (1990)