Functional polyhydroxyalkanoates (PHAs) allow chemical modifications to widen PHA diversity, promising to increase values of these biodegradable and biocompatible polyesters. Among functional PHAs, unsaturated PHA site chains can be easily grafted to add chemical groups, and to cross-link with other PHA polymer chains. However, it has been very difficult to obtain structurally controllable functional homo-, random, or block PHA. For the first time, a beta-oxidation deleted Pseudomonas entomophila was used to successfully synthesize random copolymers of 3-hydroxydodecanoate (3HDD) and 3-hydroxy-9-decenoate (3H9D). Compositions of the random copolymers P(3HDD-co-3H9D) can be adjusted by ratios of dodecanoic acid (DDA) to 9-decenol (9DEO) fed to the culture of P. entomophila. Homopolymer P3H9D was formed when only 9DEO was added to the culture. Diblock copolymers of P3HDD-b-P3H9D were produced by feeding DDA as the first precursor to form a P31-IDD block followed by adding 9DEO as the second precursor to form a second P3H9D block. It was demonstrated that random copolymers P(31-IDD-co-3H9D) could be crossed-linked under UV-radiation due to the presence of the unsaturated bonds. Thermal and mechanical characterizations of the above homo-, random, and diblock PHA polymers were conducted. It was found that the diblock polymer P3HDD-b-P3H9D increased at least 2-fold on Young's modulus compared with its random copolymers consisting of similar 31-IDD/3H9D ratios. This study demonstrates that PHA functionality could be controlled to meet various requirements.