화학공학소재연구정보센터
Combustion and Flame, Vol.161, No.6, 1460-1473, 2014
An experimental and modeling study of surrogate mixtures of n-propyl-and n-butylbenzene in n-heptane to simulate n-decylbenzene ignition
This paper presents experimental data for the oxidation of two surrogates for the large alkylbenzene class of compounds contained in diesel fuels, namely n-decylbenzene. A 57:43 molar% mixture of n-propylbenzene:n-heptane in air (21% O-2, 79% N-2) was used in addition to a 64:36 molar% mixture of n-butylbenzene:36% n-heptane in air. These mixtures were designed to contain a similar carbon/hydrogen ratio, molecular weight and aromatic/alkane ratio when compared to n-decylbenzene. Nominal equivalence ratios of 0.3, 0.5, 1.0 and 2.0 were used. Ignition times were measured at 1 atm in the shock tube and at pressures of 10,30 and 50 atm in both the shock tube and in the rapid compression machine. The temperature range studied was from approximately 650-1700 K. The effects of reflected shock pressure and equivalence ratio on ignition delay time were determined and common trends highlighted. It was noted that both mixtures showed similar reactivity throughout the temperature range studied. A reaction mechanism published previously was used to simulate this data. Overall the reaction mechanism captures the experimental data reasonably successfully with a variation of approximately a factor of 2 for mixtures at 10 atm and fuel-rich and stoichiometric conditions. (C) 2013 The Combustion Institute. Published by Elsevier Inc. All rights reserved.