Amorphous Pr0.7Ca0.3MnO3 (APCMO) films were grown on a Pt/Ti/SiO2/Si (Pt-Si) substrate at temperatures below 500 degrees C and the Pt/APCMO/Pt-Si device showed unipolar resistive switching behavior. Conduction behavior of the low resistance state (LRS) of the Pt/APCMO/Pt-Si device followed Ohm's law, and the resistance in LRS was independent of the size of the device, indicating that the conduction behavior in LRS can be explained by the presence of the conductive filaments. On the other hand, the resistance in the high resistance state (HRS) decreased with increasing the device size, and the conduction mechanism in the HRS was explained by Schottky emission. (C) 2014 Elsevier B. V. All rights reserved.