In this present investigation, kinetic studies on oil extraction were performed in marine macroalgae Ulva lactuca. The algal biomass was characterized by scanning electron microscopy and Fourier Transform-Infra Red Spectroscopy. Six different pre-treatment methods were carried out to evaluate the best method for maximum oil extraction. Optimization of extraction parameters were performed and high oil yield was obtained at 5% moisture content, 0.12 mm particle size, 500 rpm stirrer speed, 55 degrees C temperature, 140 min time and solvent-to-solid ratio as 6:1 with 1% diethyl-ether and 10% methylene chloride in n-hexane solvent mixture. After optimization, 10.88% (g/g) of oil extraction yield was achieved from 30 g of algal biomass. The rate constant was obtained for the first order kinetic study by differential method. The activation energy (Ea) was calculated as 63.031 kJ/mol. From the results obtained in the investigation. U. lactuca biomass was proved to be a suitable source for the biodiesel production. (C) 2011 Elsevier Ltd. All rights reserved.