With recent increasing trend towards development of "easy to fabricate" and simple millifluidic systems that could provide required control as well as high throughput, we present here a demonstration of potential opportunities for controlled droplet/slug formation within a flow-focusing millifluidic chip. Numerical simulations supported by experimental evidence show that the millifluidic device provides similar control in slug formation as in the case of microfluidic devices. More specifically, our investigations reveal that the acquired slug volume depends on the squeezing volume (V-squeeze) and blockage volume (V-block) in the squeezing regime. While the squeezing volume (V-squeeze) can be tuned by manipulating the flow rate of the continuous phase, the blockage volume (V-block) depended only on the geometry of the focusing region. Based on numerical simulations, two millifluidic flow focusing channel designs to pro-duce small slugs were suggested. The slugs were utilized for the synthesis of uniform copper nanoparticles. The findings are anticipated to have implications for a number fields ranging from fluid dynamics, lab-on-a-chip devices, chemical engineering, nanomaterials synthesis, protein crystallization to advanced drug delivery as well as chip fabrication. (C) 2012 Elsevier B.V. All rights reserved.