Journal of the Korean Industrial and Engineering Chemistry, Vol.10, No.2, 242-246, April, 1999
이염화이불화메탄과 사염화메탄의 불화에 의한 사불화메탄의 합성에서 반응조건의 영향
Influence of Reaction Condition on CF4 Synthesis by Fluorination of CF2Cl2 and CCl4
초록
γ-chromia 촉매상에서 이염화이불화메탄 (CF2Cl2)과 사염화메탄 (CCl4)을 불화수소로 불화하여 얻은 생성물의 분포에 대해 반응온도와 접촉시간, 그리고 반응주입 몰비 (HF/CF2Cl2 또는 HF/CCl4)의 영향을 조사하였다. 이염화이불화메탄의 불화반응은 주입 몰비 (HF/CF2Cl2)가 3 이상에서 접촉시간과 반응온도가 증가함에 따라 사불화메탄의 수율이 증가하여 반응온도 370℃ 이상과 접촉시간 3초 이상에서 100%에 가까운 수율을 얻었다. 사염화메탄의 불화반응의 경우에는 이염화이불화메탄의 불화반응보다 반응온도가 높은 500℃와 접촉시간 3초, 그리고 과량의 불화수소가 포함된 HF/CCl4의 몰비 5에서 사불화메탄의 수율이 90% 이상 얻어졌다.
For the fluorination of CF2Cl2, the yield of CF4 was found to be increased with the contact time and the reaction temperature. When the mole ratio of HF/CF2Cl2 is 3 or above, the yield of CF4 was attained to 100% at 370℃ and contact time of 3 seconds. In the case of the fluorination of CCl4 with HF, the yield of CF4 was obtained above 90% at the reaction temperature of 500℃, the contact time of 3 seconds, and the mole ratio of HF/CCl4 of 5.
- Daikin, Japan Patent, 55-113728 (1980)
- Du Pont, U.S. Patent, 3,992,325 (1976)
- Hoechst F, U.S. Patent, 3,752,850 (1973)
- Gambaretto GP, Avezzu F, Gola E, J. Appl. Chem. Biotechnol., 23, 175 (1973)
- Rowley L, Thomson J, Webb G, Winfield JM, Appl. Catal. A: Gen., 79, 89 (1991)
-
Farrokhnia A, Sakakini B, Waugh KC, J. Catal., 174(2), 219 (1998)
-
Brunet S, Boussand B, Martin D, J. Catal., 171(1), 287 (1997)
- Glenside MH, Fainberg AH, U.S. Patent, 3,202,720 (1965)