In this study, highly dispersive spherical Li-rich solid solution (Li1.2Mn0.54Ni0.13Co0.13O2) particles are successfully synthesized by a co-precipitation method. Then these particles are treated with aluminum nitrates ethanol solution at 80 degrees C. The treatment can extract lithium (Li2O) from the Li2MnO3 component in the composite of Li1.2Mn0.54Ni0.13Co0.13O2. Simultaneously, a thin layer of Al2O3 can be precipitated on the surface of the electrode particles via direct thermal decomposition of aluminum nitrates. After treatment, the first-cycle coulombic efficiency of the electrode increases from 72.1% to 93.6%, meanwhile it shows a superior cycling stability at 100 mAg(-1) with a discharge capacity of around 220 mAh g(-1) and retention of 92.5% after 100 cycles, which is much higher than that of the pristine electrode (83.2%). Even at a high current density of 2 A g(-1) (10 C), the discharge capacity could still achieve and well maintain as high as 140 mAh g(-1). (C) 2013 Elsevier Ltd. All rights reserved.