The remediation of solutions contaminated with monochloroacetic acid (CAA), which is one of the most resistant haloacetic acids (HAAs) to chemical degradation, dramatically depends on the adopted electrochemical approach: (i) CAA is only poorly oxidized either by homogeneous hydroxyl radical in electro-Fenton (EF), electrogenerated active chlorine or electro-oxidation on Pt anode; (ii) it is moderately abated by direct reduction on silver or compact graphite cathodes (from 30% in macro cells to 60% in the microfluidic devices); (iii) it is quantitatively removed by direct electro-oxidation on a boron-doped diamond (BDD) anode. The use of a microreactor enables operation in the absence of supporting electrolyte and drastically enhances the performance of the cathodic process. Simultaneously performing direct oxidation on BDD and reduction on graphite in a microfluidic cell yields the fastest CAA removal with 100% abatement at low current densities (similar to 5 mA cm(-2)). (C) 2014 Elsevier Ltd. All rights reserved.