In this study ash Ts (sintering temperature) is proposed as an index to evaluate deposition propensity during coal and biomass co-firing. The experiments were carried out in a drop-tube furnace and the resulting ash samples were collected. Is of the ash samples was measured with a pressure-drop sintering device. The chemical compositions and mineral phase characteristics of the ashes were also analyzed using ICP (inductively coupled plasma), SEM (scanning electron microscope) and XRD (X-ray diffraction), respectively. Ts decreased with increasing the mass ratio of biomass to coal with a non-linear relationship. The straw showed a more significant effect on the ash sintering temperature than the sawdust. The limitation of contents in the fuel blends should be 15% and 50% for straw and sawdust, respectively. SEM analysis indicated that biomass promoted ash deposition by accelerating the formation of neck between ash particles. Transformations of the mineral matter to lower sintering temperatures during co-firing had occurred. (C) 2014 Elsevier Ltd. All rights reserved.