Fuel Processing Technology, Vol.101, 1-9, 2012
Combustion properties of torrefied willow compared with bituminous coals
Thermal pre-treatment, or torrefaction, is a process that can improve the handling and grinding properties of biomass for combustion and co-firing. This paper compares the combustion properties of raw and torrefied Short Rotation Coppice Willow (SRC), with those of typical bituminous power station coals. The fuels were analysed using a number of standard fuel characterisation tests. Willow SRC was torrefied at 290 degrees C for two reaction times (10 min (short) and 60 min (long)). During torrefaction, longer reaction time promotes loss of nitrogen from the solid product. Chars were produced from the fuels under high heating rates up to 1000 degrees C and the char yields and nitrogen partitioning were determined. Results show that the nitrogen partitioning for both raw and torrefied biomass favours release of nitrogen into the volatiles during rapid pyrolysis. In contrast, rapid pyrolysis of the coals favours nitrogen retention in the char. The chars were subjected to thermogravimetric analysis-mass spectrometry (TGA-MS) combustion tests, which were used to calculate the char reactivities and fate of char nitrogen. The char reactivities follow the order coal char