This paper analyzes, through experimental data and a transport model, the water transported through the membrane under different operating conditions in a on a Proton Exchange Membrane (PEM) electrolyzer operating with a high-pressure gradient across the membrane from the cathode (high-pressure) side to the anode (nearly ambient-pressure) side. The phenomena involved in this movement are described and analyzed, with a focus on the electro-osmotic drag coefficient, No. We have observed that the behavior of the hydraulic percolation determines the results obtained for the electro-osmotic drag, while the contribution of the water diffusion is negligible. In general, the cathode pressure significantly reduces the water transport (a positive effect). Also, operation at lower current density reduces the net electro-osmotic drag coefficient, n(g); therefore, the best operation strategy for obtaining dried hydrogen at the cathode is to impose high cathode pressure and low current density. (C) 2010 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.