Modeling plays a very important role in the development of fuel cells and fuel cell systems. The aim of this work is to investigate the electrochemical processes of a Solid Oxide Fuel Cell (SOFC) and to evaluate the performance of the proposed SOFC design. For this aim a three-dimensional Computational Fluid Dynamics (CFD) model has been developed for an anode-supported planar SOFC with corrugated bipolar plates serving as gas channels and current collector. The conservation of mass, momentum, energy and species is solved by using the commercial CFD code FLUENT in the developed model. The add-on FLUENT SOFC module is implemented for modeling the electrochemical reactions, loss mechanisms and related electric parameters throughout the cell. The distributions of temperature, flow velocity, pressure and gaseous (fuel and air) concentrations through the cell structure and gas channels is investigated. The relevant fuel cell variables such as the potential and current distribution over the cell and fuel utilization are calculated and studied. The modeling results indicate that, for the proposed SOFC design, reasonably uniform distributions of current density over the active cell area can be achieved. The geometry of the cathode gas channel has a substantial effect on the oxygen distribution and thus the overall cell performance. Methods for arriving at improved cell designs are discussed. Crown Copyright (C) 2010, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.