Processes involving heat transfer from a humid air stream to a cold plate, with simultaneous deposition of frost, are of great importance in a variety of refrigeration equipment. In this paper, frost growth on a cold, vertical plate in free convection has been experimentally investigated. The cold plate (0.095 m high, 0.282 m wide) was placed in vertical channels open at the top and bottom in order to permit the natural circulation of ambient air. The channels, rectangular in shape. were 2.395 m high and 0.36 m wide, with the depth set equal either to 20 mm, or 10 mm, or 6 mm in order to infer the influence of channel flow area on the natural convection and frost formation. The cold plate temperature and the air relative humidity were varied in the -40 to -4 degrees C and 31-85% range, respectively, with the air temperature held fixed at 27 degrees C (+/-1 degrees C) Several quantities (thickness, temperature and mass of frost, heat flux at the cold plate), were measured during the time-evolution of the process (7.5 h from the frost growth inception), and are presented as functions of the input parameters (relative humidity and cold plate temperature); in particular, the role exerted by the plate confinement on the frost growth is discussed Data are recast in order to identify compact parameters able to correlate frost mass, thickness and density data. (C) 2009 Elsevier Ltd All rights reserved.