Laser ablation allows significant number of particles to be generated from the surfaces of cement, chromium-embedded cement, stainless steel, or alumina. The number concentrations and size distributions of the particles were experimentally investigated with respect to applied laser fluence (mJ cm(-2)) and wavelength. Based on the measurements, 266-nm laser ablation generates particles most efficiently. Of the three materials tested, cement was the most favorable for material removal, stainless steel was the next, and alumina was the least. The removal of particles from chromium-embedded cement by 532- and 1064-nm-wavelength lasers was less effective than from stainless steel, but more effective than from alumina. For ablation with a 266-nm laser, chromium enhanced the removal above 20 J cm(-2). Comparisons of other characteristics such as the size and removal rate of these particles are also discussed in this paper. (C) 2004 Elsevier Ltd. All rights reserved.