Pervaporation membranes were produced comprising a 4:1 sodium-alginate:poly(vinyl-alcohol) polymer blend selective layer with a plasticizing agent (glycerol). Membranes were supported on a poly(acrylonitrile) mesoporous support layer and non-woven fabric base. Pervaporation separation of ethanol/water mixtures was carefully followed as a function of film thickness and time. It was found, contrary to what might be expected from literature, that these films showed increased selectivity and decreased flux as film thickness was reduced. It is argued that the morphology and structure of the polymer blend changes with thickness and that these structural changes define the efficiency of the separation in these conditions. (C) 2011 Elsevier Inc. All rights reserved.