Synthesis and Physical Properties of Two-Component Polyurethane Coatings Containing Alkyd and Polyester Polyols

Park HS; Jeon YJ; Kim SK; Kang DW

Korea Polymer Journal, Vol.5, No.4, 256-261, December, 1997

It is well known that the adhesive strength of adhesive related to dynamic mechanical properties shows temperature or rate dependence. Similar depenencies were also found in the strain energy release rate of adhesive joints. However, when two values were compared in detail, a complicate correlation between two values occur. In this study, the strain energy relaese rate (G_IC) and adhesiv tensile strength in the similar deformation mode was presented.

[References]

Yamagishi Y, Hatano Y, Mizumachi H, Holzforschung, 34, 169 (1980)
Taki K, Tomita B, Mizumachi H, Mokuzai Gakkaishi, 28, 143 (1982)
Hatano Y, Tomita B, Mizumachi H, Mokuzai Gakaishi, 29(9), 578 (1983)
Mizumachi H, Hatano Y, Yamagishi Y, Holzforschung, 34(5), 169 (1991)
Turreda LD, Hatano Y, Mizumachi H, Holzforschung, 45(5), 371 (1991)
Motohashi K, Tomita B, Mizumachi H, Wood Fiber Sci., 16(1), 72 (1984)
Kobayashi T, Hatano Y, Mizumachi H, Mokuzai Gakkaishi, 37, 331 (1991)
Hatano Y, Mizumachi H, Mokuzai Gakkaishi, 35(3), 243 (1989)
Hata T, Zairyo, 17, 322 (1968)
Ripling EJ, Mostovoy S, Tatrick RL, ASTM, STP, 360, 5 (1963)
Mostovoy S, Ripling EJ, J. Appl. Polym. Sci., 10, 1351 (1966)
Mostovoy S, Ripling EJ, J. Appl. Polym. Sci., 13, 1083 (1969)
Mostovoy S, Ripling EJ, J. Appl. Polym. Sci., 15, 661 (1971)
Kinloch AJ, Shaw SJ, Development in Adhesives-2, Chap. 3 (1981)
Lim WW, Hatano Y, Mizumachi H, J. Appl. Polym. Sci., 52(7), 967 (1994)
Lim WW, Mizumachi H, J. Appl. Polym. Sci., 57(1), 55 (1995)
Lim WW, Mizumachi H, J. Appl. Polym. Sci., 63(7), 835 (1997)
Lim WW, Mizumachi H, J. Appl. Polym. Sci., 66(3), 525 (1997)
ASTM Standard E399-74: Standard Method of Test for Plane-Strain Fracture Toughness of Metallic Materials: American Society of Testing Materials (1974)
Bascom WD, Cottington RL, Jones RL, Peyer P, J. Appl. Polym. Sci., 19, 2545 (1975)
Bascom WD, Cottington RL, J. Adhes., 7, 333 (1976)
Takemura A, Tomita B, Mizumachi H, J. Appl. Polym. Sci., 30, 4031 (1985)

[Referenced By]

[1] Yamagishi Y, Hatano Y, Mizumachi H, Holzforschung, 34, 169 (1980)

[2] Taki K, Tomita B, Mizumachi H, Mokuzai Gakkaishi, 28, 143 (1982)

[3] Hatano Y, Tomita B, Mizumachi H, Mokuzai Gakaishi, 29(9), 578 (1983)

[4] Mizumachi H, Hatano Y, Yamagishi Y, Holzforschung, 34(5), 169 (1991)

[5] Turreda LD, Hatano Y, Mizumachi H, Holzforschung, 45(5), 371 (1991)

[6] Motohashi K, Tomita B, Mizumachi H, Wood Fiber Sci., 16(1), 72 (1984)

[7] Kobayashi T, Hatano Y, Mizumachi H, Mokuzai Gakkaishi, 37, 331 (1991)

[8] Hatano Y, Mizumachi H, Mokuzai Gakkaishi, 35(3), 243 (1989)

[9] Hata T, Zairyo, 17, 322 (1968)

[10] Ripling EJ, Mostovoy S, Tatrick RL, ASTM, STP, 360, 5 (1963)

[11] Mostovoy S, Ripling EJ, J. Appl. Polym. Sci., 10, 1351 (1966)

[12] Mostovoy S, Ripling EJ, J. Appl. Polym. Sci., 13, 1083 (1969)

[13] Mostovoy S, Ripling EJ, J. Appl. Polym. Sci., 15, 661 (1971)

[14] Kinloch AJ, Shaw SJ, Development in Adhesives-2, Chap. 3 (1981)

[15] Lim WW, Hatano Y, Mizumachi H, J. Appl. Polym. Sci., 52(7), 967 (1994)

[16] Lim WW, Mizumachi H, J. Appl. Polym. Sci., 57(1), 55 (1995)

[17] Lim WW, Mizumachi H, J. Appl. Polym. Sci., 63(7), 835 (1997)

[18] Lim WW, Mizumachi H, J. Appl. Polym. Sci., 66(3), 525 (1997)

[19] ASTM Standard E399-74: Standard Method of Test for Plane-Strain Fracture Toughness of Metallic Materials: American Society of Testing Materials (1974)

[20] Bascom WD, Cottington RL, Jones RL, Peyer P, J. Appl. Polym. Sci., 19, 2545 (1975)

[21] Bascom WD, Cottington RL, J. Adhes., 7, 333 (1976)

[22] Takemura A, Tomita B, Mizumachi H, J. Appl. Polym. Sci., 30, 4031 (1985)