Blend of Nylon 6-PET Waste

Kale DD; Kharade AY; Kim JG; Jung IH

Korea Polymer Journal, Vol.6, No.1, 105-109, March, 1998

Nylon 6 and waste Pet were melt blended. Ethylene acrylic acid copolymer. EAA, polycarbonate PC and stylene-ethylene-butylene-stylene copolymer. SEBS were used as compatibilizers. Blends prepared at higher speeds showed better properties. The water vapour permeability of the blend was considerably lower than that of virgin nylon. Properties of the blend were correlated with morphology.

[References]

Jadhav JY, Kanto SW, Polysters Thermoplastic, in Encyclopedia of Polymer Science and Engineering, H.F. Mark, N.H. Bikales, C.G. Oveberger, and G. Mengis, Eds., Wiley Interscience, vol. 12, pp. 217 (1985)
Tsuzukida S, Narada H, Okada K, Kumahara H, Jpn Kokai Tokkyo Koho, Japan Patent, 7601,434 (1976)
Nevrekar NB, Kharade AY, Indian Patent No. 176115 (1996)
Combellic WA, Barrier Polymers in Encyclopedia of Polymer Science and Eng., H.F. Mark, N.H. Bikales, C.G. Overberger, and G. Mengis, Eds., Wiley Interscience, vol. 2, pp. 176 (1985)
Subramanian PM, Polymer Blends: Morphology and Permeability, Barrier Properties in Polymer Science (Symp. Proc. Polym. 91), S. Sivaram, Ed., vol. 2, pp. 847 (1991)
Kamal MR, Jinnah AI, Utracki LA, Polym. Eng. Sci., 24(17), 1337 (1984)

[1] Jadhav JY, Kanto SW, Polysters Thermoplastic, in Encyclopedia of Polymer Science and Engineering, H.F. Mark, N.H. Bikales, C.G. Oveberger, and G. Mengis, Eds., Wiley Interscience, vol. 12, pp. 217 (1985)

[2] Tsuzukida S, Narada H, Okada K, Kumahara H, Jpn Kokai Tokkyo Koho, Japan Patent, 7601,434 (1976)

[3] Nevrekar NB, Kharade AY, Indian Patent No. 176115 (1996)

[4] Combellic WA, Barrier Polymers in Encyclopedia of Polymer Science and Eng., H.F. Mark, N.H. Bikales, C.G. Overberger, and G. Mengis, Eds., Wiley Interscience, vol. 2, pp. 176 (1985)

[5] Subramanian PM, Polymer Blends: Morphology and Permeability, Barrier Properties in Polymer Science (Symp. Proc. Polym. 91), S. Sivaram, Ed., vol. 2, pp. 847 (1991)

[6] Kamal MR, Jinnah AI, Utracki LA, Polym. Eng. Sci., 24(17), 1337 (1984)