This study investigated the removal of recalcitrant compounds in the presence of a hydrophilic compound. n-Hexane is used as a model compound to represent hydrophobic compounds. Methanol has been introduced in mixture with n-hexane in order to increase the bioavailability of n-hexane in trickle-bed-air-biofilters (TBABs). The mixing ratios investigated were: 70% methanol:30% n-hexane, and 80% methanol:20% n-hexane by volume. n-Hexane loading rates (LRs) ranged from 0.9 to 13.2 g m(-3) h(-1). Methanol LRs varied from 4.6 to 64.5 g m(-3) h(-1) and from 2.3 to 45.2 g m(-3) h(-1) depending upon the mixing ratio used. Biofilter performance, effect of mixing ratios of methanol to n-hexane, removal profile along biofilter depth, COD/nitrogen consumption and CO2 production were studied under continuous loading operation conditions. Results have shown that the degradation of n-hexane is significantly enhanced by the presence of methanol for n-hexane LRs less than 13.2 g m(-3) h(-1). For n-hexane LR greater than 13.2 g m(-3) h(-1), even though methanol had impacted n-hexane biodegradation, its removal efficiency was higher than our previous study for biodegradation of n-hexane alone, in presence of surfactant, or in presence of benzene. On the other hand, the degradation of methanol was not impacted by the presence of n-hexane. (C) 2012 Elsevier B.V. All rights reserved.