The insensitive high-explosive PAX-21 was the first of its kind fielded in an artillery munition by the United States military. This formulation contains three main components: RDX, dinitroanisole, and ammonium perchlorate (AP). In March 2012, detonation tests were conducted on PAX-21 60 mm mortar rounds to determine the energetic residues resulting from high-order and blow-in-place (BIP) detonations. Post-detonation residues were sampled and analyzed for the three main PAX-21 components. Concentrations of RDX and dinitroanisole in the samples were quite low, less than 0.1% of the munitions' original organic explosive filler mass, indicating high order or near high order detonations. However, disproportionately high concentrations of AP occurred in all residues. The residues averaged 15% of the original AP following high-order detonations and 38% of the original AP mass following the BIP operations. There was no correlation between AP residues and the RDX and dinitroanisole. Perchlorate readily leached from the detonation residues, with over 99% contained in the aqueous portion of the samples. Use of these rounds will result in billions of liters of water contaminated above drinking water perchlorate limits. As a result of this research, PAX-21 mortar rounds are currently restricted from use on US training ranges. Published by Elsevier B.V.