This paper reports some experimental work on hot surface ignition temperatures of dust deposits. Dust layers up to 75 mm in depth were ignited using a modified version of the standard 5 turn layer apparatus. The measured ignition temperatures show good agreement with predictions using the method given in EN 50281-2-1. Ignition temperatures of conical dust deposits over an electrically heated box were not predictable, but were not too dissimilar from the ignition temperatures of the thick layers. Both tests gave adequate reproducibility in round robin tests. Rotating steel wheels in contact, immersed in a dust deposit produce the frictional hot surfaces. A relation between the power lost by friction and the surface temperature developed has been derived. The surface temperatures leading to ignition were close to the ignition temperatures for the conical deposits on the heated box. The similarities between the ignition temperatures of dust deposits in several configurations indicate that a simple test for ignition temperature measurement could have wide application in dusty environments. (C) 2006 Elsevier Ltd. All rights reserved.