This experimental study was originally designed to quantify the electrostatic characteristics of offshore grade fiberglass reinforced plastic (FRP) pipes [Dastidar, A. G., Dahn, C. J., Cole, B. W., & Lo, K. H. (2005a). Electrostatic characteristics of FRP pipes. In Fourth international conference on composite materials for offshore operation, Houston, TX, Oct 4-6, 2005]. Discharge energies were measured from the sample surfaces for each test condition after an aggressive corona charging of up to -40 kV. While the measured values of total discharge energy were relatively high for some samples, the energy in the first peak was significantly lower. The first peak energy is thought to be the most significant measure in establishing the potential for incendive events. To further quantify the incendive potential of discharges from FRP pipes, a unique test method was developed [Dastidar, A. G., Dahn, C. J., Cole, B. W., & Lo, K. H., (2005b). Incendiary nature and electrostatic discharge characteristics of FRP pipes. In Fourth international conference on composite materials for offshore operation, Houston, TX, Oct 4-6, 2005]. The methodology has been expanded to include other FRP components. This paper describes the test method and the test results obtained for testing several FRP structures and materials (pipes, grill work, railing etc). The significance of the experimental results to industry is also discussed. (C) 2007 Elsevier Ltd. All rights reserved.