Journal of Loss Prevention in The Process Industries, Vol.20, No.4-6, 509-516, 2007
Impact of a shock wave on a structure on explosion at altitude
The number of explosive attacks on civilian buildings has recently increased and the pattern of damage inflicted on structures when an explosion takes place at altitude remains quite difficult to predict. The primary aim of the work reported here was to enhance the understanding of how blast waves from an explosion at altitude interact with the ground and with a structure. Small-scale experiments were conducted using a propane-oxygen stoichiometric mixture as explosive. This approach is original because it models high-explosive detonation in terms of gaseous charge explosion using TNT equivalents. Several non-dimensional laws are expressed and validated by experiments. These relationships allow determination of the propagation of a blast wave and its interaction with a structure as a function of the position of the explosive charge when the explosion occurs at altitude. Then, from knowledge of the blast loading, using Hopkinson's scaling law and TNT equivalents, we can predict the interaction of blast waves with the ground and a structure on a real scale. Simulations were performed using the Autodyn code, and good correlation with the experimental results was obtained. (C) 2007 Elsevier Ltd. All rights reserved.