Safety and health of workers potentially being at risk from explosive atmospheres are regulated by separate regulations (ANSI/AIHA in USA and ATEX in the European Union). The ANSI/AIHA does not require risk assessment whereas it is compulsory for ATEX. There is no standard method to do that assessment. For that purpose we have applied the explosion Layer of Protection Analysis (ExLOPA), which enables semi-quantitative risk assessment for process plants where explosive atmospheres occur. The ExLOPA is based on the original work of CCPS for LOPA taking into account an explosion accident scenario at workplace. That includes typical variables appropriate for workplace explosion like occurrence of the explosive atmosphere, the presence of effective ignition sources, activity of the explosion prevention and mitigation independent protection layers as well as the severity of consequences. All those variables are expressed in the form of qualitative linguistic categories and relations between them are presented using expert based engineering knowledge, expressed in the form of appropriate set of rules. In this way the category of explosion risk may be estimated by the semi-quantitative analysis. However, this simplified method is connected with essential uncertainties providing over or under estimation of the explosion risk and may not provide real output data. In order to overcome this problem and receive more detailed quantitative results, the fuzzy logic system was applied. In the first stage called fuzzification, all linguistic categories of the variables are mapped by fuzzy sets. In the second stage, the number of relation between all variables of analysis are determined by the enumerative combinatorics and the set of the 810 fuzzy rules "IF-THEN" is received. Each rule enables determination of the fuzzy risk level for a particular accident scenario. In the last stage, called defuzzification, the crisp value of final risk is obtained using a centroid method. The final result of the risk presents a contribution of each risk category represented by the fuzzy sets (A, TA, TNA and NA) and is therefore more precise and readable than the traditional approach producing one category of risk only. Fuzzy logic gives a possibility of better insights into hazards and safety phenomena for each explosion risk scenario. It is not possible to receive such conclusions from the traditional ExLOPA calculation results. However it requires the application of computer-aided analyses which may be partially in conflict with a simplicity of ExLOPA. The practical example provides a comparison between the traditional results obtained by ExLOPA and by fuzzy ExLOPA methods. (C) 2011 Elsevier Ltd. All rights reserved.