Journal of Membrane Science, Vol.415, 718-724, 2012
A highly electrically conductive polymer-multiwalled carbon nanotube nanocomposite membrane
Electrically conductive polymeric ultrafiltration membranes were fabricated by pressure filtering a thin layer of poly(vinyl alcohol) - cross-linked with carboxylated multiwalled carbon nanotubes (CNTs) and succinic acid - onto a support membrane. The effect of the degree of cross-linking and that of CNT concentration on the performance of these membranes was evaluated. These membranes demonstrated high pure water flux with good particle separation, high electrical conductivity, low polymer crystallinity, and low surface tensions. Membranes formed with 20 min cross-linking curing times and 20 w/% CNT concentration showed electrical resistivity as low as 2.8 x 10(-4) Omega m (conductivities as high as 3.6 x 10(3) S/m), pure water flux of 1440 L/m(2) h at pressures of 550 kPa, and triple-point initial contact angles as low as 40 degrees with high hysteresis. (c) 2012 Elsevier B.V. All rights reserved.
Keywords:Poly(vinyl alcohol);Multi-walled carbon nanotubes;Conducting polymer;Ultrafiltration membrane;Surface coating;Pressure-filtration deposition;Cross-linking