Electrospun nanofibers have attracted great attention as potential reinforcements in composite application due to their high specific surface area, high porosity, and versatility. Because the electrospun nanofibers exhibit relatively low mechanical strength due to low crystallinity and random alignment, many researchers have tried to enhance the mechanical strength through various approaches, such as heat treatment and fiber orientation control. These methods, however, are difficult to control and require the use of high temperatures and sophisticated apparatuses, and high costs. In this study, we investigate a novel microwave technique to fabricate high-strength electrospun meta-aramid nanofiber mats. To optimize the microwave irradiation conditions, the electrospun nanofiber was treated at varying levels of moisture and for different irradiation times. Field emission scanning electron microscopy was used to observe the surface morphology of the electrospun nanofiber mats at the different irradiation times. The changes in the crystallinity and thermal properties were investigated using X-ray diffraction and thermogravimetric analysis measurements. Tensile tests were performed to measure the mechanical strength of the meta-aramid nanofiber mats with respect to each parameter. As a result, any residual solvents and salts were removed, and the degree of crystallization was dramatically increased by microwave irradiation under wet conditions. These effects led to a 2.8-fold increase in the tensile strength of the nanofiber mats compared with an untreated mat. (c) 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014, 52, 807-814