As a part of our objective to build an immunosensor for the detection of the pesticide atrazine (ATZ) in environmental samples, we studied the self-assembling process of the disulfide derivative of the pesticide atrazine on a gold substrate. Atrazinebased self-assembled monolayers were characterized by ellipsometry, scanning tunneling microscopy, polarization modulation infrared reflection absorption spectroscopy (PM IRRAS), X-ray photoelectron spectroscopy and quartz crystal microbalance (QCM) measurements. Two different time constants for the adsorption process were observed, depending on the experimental method used. The QCM data reflect adsorption kinetics of the original disulfide compound, whereas ellipsometry and ex situ PM IRRAS refer to the formation of thiolate (ATZS) monolayers. In situ QCM data demonstrated the suitability of such monolayers for the detection of atrazine in aqueous samples. Exposure of the ATZS sensing surface to an anti atrazine antibody (anti-ATZ IgG) resulted in complete coverage of the surface by antibody, whereas approximately half of the antibody molecules were displaced from the QCM sensor surface by further addition of atrazine into the solution.