Self-assembled monolayers (SAMs) from an 11-cyanoundecyltrichlorosilane (CN-SAM) precursor were deposited on porous SiCOH low-k dielectrics with three different pore radii, namely, 1.7, 0.7, and lower than 0.5 nm. The low-k dielectrics were first pretreated with either O-2, or He/H-2 plasma in order to generate silanol groups on the hydrophobic pristine surface. Subsequently, the SAMs were chemically grafted to the silanol groups on the low-k surface. The SAMs distribution in the low-k films depends on the pore diameter: if the pore diameter is smaller than the size of the SAMs precursors, the SAM molecules are confined to the surface, while if the pore diameter exceeds the van der Waals radius of the SAMs precursor, the SAM molecules reach deeper in the dielectric. In the latter case, when the pore sidewalls are made hydrophilic by the plasma treatment, the chemical grafting of the SAM precursors follows the profile of the generated silanol groups. The modification depth induced by the O-2 plasma is governed by the diffusion of the oxygen radicals into the pores, which makes it the preferred choice for microporous materials. On the other hand, the vacuum ultraviolet (VUV) light plays a critical role, which makes it more suitable for hydrolyzing mesoporous materials. In addition to the density of the surface -OH groups, the nanoscale concave curvature associated with the pores also affects the molecular packing density and ordering with respect to the self-assembly behavior on flat surfaces. A simple model which correlates the low-k pore structure with the plasma hydrophilization presented. mechanism and the SAMs distribution in the pores is