An approach for the defect density reduction in 3C-SiC epitaxially grown on Si is to improve the quality of the carbonized layer during the early stage of growth. For this reason the conventional carbonization process was replaced by a slower and nearer equilibrium carbonization method. Carbon is introduced by implantation into oxide of an oxidized Si substrate, near the SiO2/Si interface, and then it is transferred to the Si surface by annealing. Good quality 3C-SiC grains are formed embedded into the Si substrate, which are absolutely flat at the SiO2/Si interface. Another advantage of the new carbonization process is the elimination of the cavities due to the suppression of Si out-diffusion.